|Starting Power:||2.30-270Kw/380V||Maximum Use Temperature:||750℃|
|Temperature Control Precision:||±1℃||Furnace Length:||10-32m|
|Mesh Belt Width:||300-4000mm||Transfer Method:||304 / 321 Stainless Steel Mesh Belt, Frequency Conversion Speed Regulation|
glass electrothermal decorating lehr,
4000mm glass annealing lehr,
2.30kw glass annealing lehr
Mesh belt type glass electrothermal decorating lehr
Product description: this lehr is mainly used for glass winebottles, glassware, daily glass and process glass, high-temperature (stained paper) trademark decoration, gold decoration and drying of low-temperature glass paint; the total length of the furnace is 18 to 60 meters; the maximal use temperature is 650℃; and it is suitable for large-batch continuous production.
1.Hearth dimension: 9 to 25 steres
2.Maximal use temperature: 650℃(temperature adjustable)
3.Electric power: 15 to 150(Kw/380V)
4.Heating mode: electric heating
5.Electrothermal element: quartz electrothermal tube
6.Temperature control mode: PID intelligent digital display temperature control, SCR module control, linear proportional output, manual and automatic regulation, and temperature control precision ±1℃
7.Temperature control point: 3 to 5
8.Exhaust hole: 2 to 3 (concentrated exhasut)
9.Mesh belt material: 1Cr13 stainless steel or 304 stainless steel
10.Mesh speed control: AC excitation speed regulation or variable frequency speed regulation.
The production process is that the product is placed on the mesh belt, driven by the mesh belt, and heated from the feed end into the furnace through the furnace opening to form, then gradually cooled by the cooling chamber, and then collected by the discharge end to complete the entire heat treatment process.
Please contact us for details, we will tailor-made for you!
Contact Person: Linda Yu