|Ultra-clean Emissions:||≤5mg / Nm³||Advantage:||High Temperature Resistance And Corrosion Resistance|
|Operating Temperature:||≤800℃||Effectiveness:||≥99.99% Is Very Stable|
|Air Leakage Rate:||1%||Emission Stability:||Long-term Efficient And Stable|
High Temperature Flue Gas Treatment System,
Incineration Industry Flue Gas Treatment System
CF High Temperature Flue Gas Treatment Equipment Is Used In The Incineration Industry , Etc.
|Comprehensive performance comparison of CF dust collector and conventional dust collector|
|Types of||CF dust filter||Bag filter bag||Electric dust collector|
|Technical index||Processing gas volume||Very big||big||Very big|
|Pressure loss / Pa||800~2000||1500~2000||100~200|
|Operating temperature / ℃||≤800||120~180||120~400|
|effectiveness/%||≥99.99% is very stable||90% -99% but unstable||70%-97%|
|Air leakage rate /%||1||2.5||2.5|
|Emission stability||Long-term efficient and stable||stable||Affected by coal type, unstable|
|Emission concentration / (mg-m3)||≤5||≤30||50~100|
|Economic Indicators||Equipment cost||Medium||Medium||High|
|Footprint||medium and large||Medium||big|
|Equipment energy consumption||Low||Medium||big|
|life||6-10 years overhaul||3-5-year overhaul||Replace filter in 2-6 years|
|Secondary pollution||no||no||There is a small amount|
Pollutant removal objects: dust + acid gas + nitrogen oxides
➢ The CF high temperature dust and acid removal device installed in the air pollution control equipment can be directly installed on the orifice plate of the dust collector. This product can be operated under high temperature and corrosive chemical substances (such as acid and alkali). The hard structure makes the filtration efficiency and long-term use can maintain stable performance.
➢ In addition to filtering dust, it can be reacted with different additives such as sodium bicarbonate (NaHCO3) or lime (Ca (OH) 2) to remove acid gases (SO2, HCI, H ...) Ammonia (NH3) / urea is added to remove hydroxide.
Contact Person: Linda Yu